manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 215

IN CASE OF EMERGENCY

12-15

EMERGENCY TOWING

For emergency towing when a towing service is not available,
your vehicle is equipped with the towing hooks under the front
and rear of the vehicle for use with a tow rope.

When towing your vehicle with the tow rope:

• Secure the rope to both of the towing hooks under the front

of the vehicle as tight as possible.

• To recognize the towing rope, bind a white colored cloth on

the center of the rope.

• Switch on the hazard warning flasher of both vehicles.

• Place the gearshift lever in neutral and release the parking

brake.

• Set the ignition in the ON position to release the steering

column lock and to permit the operation of brake lamps,
horn and windshield wipers.

• Only the driver should be in the towed vehicle to steer it and

operate the brakes.

• To prevent the entry of exhaust fumes from the towing

vehicles, close the windows and place the air intake lever
to the recirculation mode.

• Drive off slowly and avoid jerky movements.

• The distance between the towing vehicle and the towed

vehicle shouldn't be over 25 m and tow the vehicle within
25 km with 5 km/h of towing speed. The length of a rope
should be less than 5 m.

Within 5m

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands