manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 144

SEAT BELT AND AIR BAG

8-6

HOW TO FASTEN THE THREE POINT SEAT BELT IN FRONT SEATS

2. Position the shoulder belt across the

body and the lap belt as low as pos-
sible across the hips. Insert the latch
plate into the buckle until it clicks.

3. Adjust the seat belt height as required.

1. Pull out the latch plate from the

retractor. If the seat belt is locked when
being pulled out, rewind it completely
in the retractor, then pull it out to the
desired length.

4. Pull the latch plate to make sure it is

securely locked.

5. To unfasten the seat belt, press the

button 

 on the buckle.

Sit back in the seat with the seatback in an
upright position and wear the seat belt.

CAUTION

Make sure that the seat belt is not twisted.

WARNING

Improperly worn seat belts could cause se-
rious injury or death.

• Put the lap belt as low as possible across

the hips. Do not put it across waist. In an
accident, the belt may pressurize on your
abdomen. This may also result serious in-
ternal injuries.

• Shoulder belt should be positioned midway

over the shoulder, never across the neck.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands