manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 141

SEAT BELT AND AIR BAG

8-3

11-SEATERS

To protect you and your passengers in the event of an accident, it is compulsory that the seat belts are worn by all occupants
while the vehicle is in use.

Three point seat belt
(second row seat, left)

Three point seat belt
(second row seat, right)

Three point seat belt

(third row seat, left)

Three point seat belt
(third row seat, right)

Three point seat belt

(fourth row seat, left)

Lap belt

(center seats)

Three point seat belt

(fourth row seat, right)

Three point seat belt
(driver’s seat)

Three point seat belt
(passenger’s seat)

• Before driving, all occupants should fasten the seat belts. If not, the occupant can be injured

seriously in collision or sudden maneuvering of the vehicle.

• Never use a same seat belt more than one person at a time.

• Modifications and improper maintenance for the safety systems could cause serious injury.

The safety systems including seat belt should be checked and repaired by only Ssangyong
Dealer or Ssangyong Authorized Service Operation.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands