manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 210

IN CASE OF EMERGENCY

12-10

15. Put the removed tyre in the luggage compartment and put

the tools into the tool box.

• If over tightened, the wheel nuts could be damaged. Do not over

tighten the wheel nuts by pressing the wheel nut wrench by foot
or using assist pipe.

• When the tyre has been replaced, retighten it after 1,000 km of

driving.

CAUTION

• As soon as possible, take your vehicle to a Ssangyong dealer or

Ssangyong Authorized Service Operation and have the wheel nuts
tightened according to Ssangyong specifications.

• Improperly tightened wheel nuts can cause the wheel to become

loose and even come off. This could lead to an accident. Be sure
to tighten the wheel nuts as specified.

• Mixing tyres could cause you to lose control while driving. Be sure

to use the same size and type tyres of the same manufacturer on
all wheels.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands