manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 145

SEAT BELT AND AIR BAG

8-7

The center jump seat has a lap belt, and both side seats have a lap and three point belt. Use the three point seat belt when the
seat is facing forwards, and use the lap belt when the seat belt is facing rearwards.

Lap Belt in Side Seats (7 Seaters Only)

SECOND ROW SEAT

Buckle for right seat

Seat Belt Latch for Center Jump Seat

Latch for Lap Belt
in Side Seat

The latch is stored in the
side pocket.

Fastening the Seat Belt

• Insert the metal latch plate

into the buckle until it
clicks.

• To unfasten the seat belt,

press the button   on the
buckle.

Buckle for

left seat

Buckle for center
jump seat

* 9-Seaters vehicle does not have the center jump seat in the second row seat.

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands