manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 25

SAFETY PRECAUTIONS

1-9

Fade

Reduction or loss in braking force due to loss of friction
between brake pads and disc. Caused by heat buildup
through repeated or prolonged brake application.

Vapor Lock

The abnormal condition that occurs when brake fluid contains too
much moisture and is overheated, causing the moisture in the fluid
to boil. Gas bubbles are formed in the fluid, which causes a spongy
brake pedal or a complete loss of hydraulic pressure.

SAFETY PRECAUTIONS

Cautions While Driving

1. Do not turn off the engine while the vehicle is in motion.

The power steering function and the brake assist func-
tion will be deactivated. You can use only mechanical op-
erations of the steering and brake system without assisted
pressure. Thus, you need bigger force to steer and stop
your vehicle. It may cause an accident.

2. Do not adjust driver’s seat, rear view mirrors, steering

wheel while the vehicle is moving.

3. While driving, do not depress the brake pedal when the ac-

celerator pedal is depressed. Otherwise, the response from
accelerator pedal may be delayed. This symptom is the safety
function to protect the vehicle’s drive system. This symptom
can be eliminated if you depress and release the accelera-
tor pedal once when the brake pedal is not depressed.

Abrupt Start, Acceleration and Stop

1. Avoid abrupt starts, acceleration or stops. It may cause

high fuel consumption or an accident.

2. Gently accelerate and decelerate the engine.

Engine Brake

When driving down the long slope, use the engine brake ef-
fect by downshifting the transmission in steps according to
the driving conditions while using the service brake. An ex-
cessive operation of the service brake could result in “Fade”
or “Vapor Lock” effect.

Stopping and Parking the Vehicle

1. Never leave infants and children unattended in the vehicle

with the doors locked. They can move the vehicle
unexpectedly. They can be suffocated in especially hot
weather.

2. When parking the vehicle on the hilly road, apply the park-

ing brake and chock the blocks under the wheels. Place
the gear selector lever to “P” position (automatic transmis-
sion equipped vehicle).

3. If possible, do not stop and park the vehicle on the steep

road.

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands