manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 19

SAFETY PRECAUTIONS

1-3

STARTING THE ENGINE AND DRIVING OFF THE VEHICLE

1. Apply the parking brake.

2. Make sure that there are no persons or obstacles in the

danger area around the vehicle.

3.

• Automatic transmission equipped vehicle

Move the selector lever to 

“P”

 

position and depress the

brake pedal.

• Manual transmission equipped vehicle

Move the gearshift lever to Neutral position and fully de-
press the brake pedal and the clutch pedal.

The engine in automatic transmission equipped vehicle can be

started only when the selector lever is at 

“P”

 or 

“N”

 position

(“P” position is preferred). The engine in manual transmission
equipped vehicle can be started only when the clutch pedal is
fully depressed.

Do not turn the ignition key to 

“START”

 position while the en-

gine is running. It could result in serious start motor damage.

CAUTION

In automatic transmission equipped vehicle, depress the brake

pedal when the selector lever is at 

“P”

 position. Never depress

the accelerator pedal.

WARNING

Parking brake release lever

Parking brake

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands