manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 57

INTERIOR SWITCHES

4 - 9

CRUISE CONTROL SWITCH*

CRUISE CONTROL*

Cruise control is an automatic speed control system that maintains
a desired driving speed without using the accelerator pedal.

The vehicle speed must be greater than 36 km/h to engage cruise
control. This feature is especially useful for motorway driving.

Setting a Desired Speed

1. To operate the cruise control, accelerate to your de-

sired speed using the acceleration pedal more over 36
km/h.

2. When the desired speed is reached, push up the

ACCEL.SET. switch of a cruise control lever or push
down the DECEL.SET. switch for 1 second per one
switching and then release the acceleration pedal,
slowly.

3. Now, the vehicle is cruised by this system with set

speed.

4. And you can set to other vehicle speed again with above

steps after acceleration pedal intervention during cruise
control running.

Improper use of cruise control could be dangerous.

• Do not use on winding roads.

• Do not use in heavy traffic.

• Do not use on slippery, wet roads.

This could result in a loss of control, collision, and/or personal injuries.

CAUTION

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands