manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 125

SEATS

7-7

Seatback Table and Cup Holder

A table is installed at the rear
of the front seatback. To do
some temporary jobs and put
something on it, swing it up.
Turn it back to its original po-
sition when not in use.

Seatback Storage Pocket

The front seatback storage pocket
is provided to store small per-
sonal properties.

CONVENIENCE DEVICES IN FRONT SEATS

Seat Under Tray

The seat under tray is
located under the
passenger’s seat. Hold
the front of the tray and
pull forwards to use.

• Do not put heavy objects on the table. The table can be damaged.

• Do not use the table when the vehicle is moving. It may result in a personal injury during abrupt

braking or sharp acceleration.

• Do not put any hot beverage cup or can on the table when the vehicle is moving. It may result in a

personal injury during sudden braking or starting.

WARNING

* Locations of cup holder may vary according to the seats.

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands