GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
FRU/Component Index
Page no. 147
Chapter 3
Component-index-intro.fm
2-5
Loc (Location)
An entry in this column means that the component is mentioned in a diagram or illustration contained in
the
. A link is provided to the diagram or illustration.
2-6
FD (Functional Diagram)
An entry in this column means that the component is mentioned in a diagram contained in the
. A link is provided to the diagram.
2-7
Cabl (Cable Information)
An entry in this column means that the component is described in the
. A link is provided to the description.
2-8
CL (Central Listing)
An entry in this column means that the component is described in the
. A link
is provided to the description.
2-9
FRU (Field Replaceable Unit)
The entry in this column indicates whether the component is a FRU:
•
FRU Y
: It is a FRU, and can be ordered.
•
FRU N
: It is not a FRU.
2-10 Trac (Traceability)
The entry in this column indicates FRU Traceability:
•
Trac Y
: the FRU is tracked by a product locator.
•
Trac N
: the FRU is not tracked by a product locator.
2-11 D/R (Disassembly/Reassembly)
•
An entry of
D/R
in this column indicates that Disassembly/Reassembly of the component is explained
in a D/R Job Card. The D/R Job Card includes any required post-requisite procedures (recalibrations
and checks, etc.). A link is provided to the appropriate D/R Job Card.
•
An entry of
P-D/R
in this column means that Disassembly/Reassembly of the component does not
require specific explanation (no D/R Job Card is provided). However, some recalibrations and/or
checks are required after changing or disturbing the component. These requirements are listed in the
Post-D/R scenario (
Scenario PDR A001 - Post-D/R Procedures
). A link is provided to
the appropriate section.
•
If the D/R column is blank, the Disassembly/Reassembly of the component is considered self-explan-
atory, and that no special recalibration or check is needed after replacement.
•
If the D/R column is contains
SWF
, this means that Disassembly/Reassembly instruction of the com-
ponent is
S
upplied
W
ith the
F
RU.
•
When a component is not a FRU (i.e. FRU N), the D/R indicated corresponds to the FRU (i.e. FRU Y)
that contains the non-FRU.
