background image

TTX Cartridge Kit for KTM EXC/EXC-F/XC-W/XCF-W, 

Husqvarna TE/FE & GASGAS EC/EC-F

FCX 0301

Mounting Instructions

 Note! 

1

Please note that this image is a general 

representation of the product and may differ 

slightly from your product.

 Note! 

1

Please note that during storage and 

transportation, especially at high ambient 

temperature, some of the oil and grease used for 

assembling may leak and stain the packaging. 

This is in no way detrimental to the product, wipe 

off the excessive oil/grease with a cloth.

 Note! 

1

Before installing this product, check the contents 

of the kit. If anything is missing, please contact 

an Öhlins dealer.

 Warning! 

Before installing this product, read the Öhlins 

Owner’s Manual. The shock absorber/front fork/

steering damper is an important part of your 

vehicle and will affect the stability.

 Note! 

1

No springs included in this kit. Use appropriate 

Öhlins Front Fork springs, part no. 08765-XX. 

See the Spring guide in this folder or contact 

Öhlins for advice.

Kit Contents
Description

Part No

Pcs

TTX Cartridge Kit

FCX 0301

1

TTX Cartridge sticker

00191-63

2

Sticker set Öhlins

1

Owner’s manual

07296-91

1

Base plug (with o-rings)

15430-04

2

Circlip

15440-01

2

Spacer 2 mm

15443-02

18

Hydraulic stop cup

15456-08

2

Sticker service schedule 
MX fork & shock

15211-01

1

Summary of Contents for FCX 0301









Reviews: