Chapter 7
Page no. 770
JC-ELE-A-050.fm
GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A050 - Changing Senographe Internal IP Addresses
9
STEERING GUIDE FOR FUTURE COMPONENT UPGRADES
If you ever upgrade the software on any of the Senographe components in the future you must ensure
that the internal IP addresses are reconfigured back to their default values
before
you run the software
upgrade for that component. To do this you would proceed as described in the following sub section.
9-1
Steering Guide for Future AWS Software Upgrades on the ADS Computer
If you want to upgrade the AWS Workstation software on the ADS Computer, proceed as follows:
•
to reconfigure each of the files on the ADS Computer back to their
default 192.168.1.0 network address scheme.
•
Run the upgrade of the AWS Workstation software on the ADS Computer.
•
to reconfigure each of the files on the ADS Computer back to your
preferred network address scheme (e.g. 192.168.100.0 network).
9-2
Steering Guide for Future Software Upgrades on the IDC
If you want to upgrade the software on the IDC, proceed as follows:
•
to reconfigure the IDC back to the default IP address of 192.168.1.20.
•
to reconfigure each of the files on the ADS Computer back to their
default 192.168.1.0 network address scheme.
•
Run the upgrade of the software on the IDC.
•
to reconfigure the IDC back to your preferred IP address (e.g.
192.168.100.20).
•
to reconfigure each of the files on the ADS Computer back to your
preferred network address scheme (e.g. 192.168.100.0 network).
9-3
Steering Guide for Future Software Upgrades on the Gantry CPU
If you want to upgrade the software on the Gantry CPU, proceed as follows:
•
to reconfigure the Gantry CPU back to the default IP address of
192.168.1.40.
•
to reconfigure each of the files on the ADS Computer back to their
default 192.168.1.0 network address scheme.
•
Run the upgrade of the software on the Gantry CPU.
•
to reconfigure the Gantry CPU to your preferred IP address (e.g.
192.168.100.40).
•
to reconfigure each of the files on the ADS Computer back to your
preferred network address scheme (e.g. 192.168.100.0 network).
