Chapter 3
Page no. 268
Indicators and Switches.fm
GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Central Listing
2-6-3.
Mains Distribution Board 200PL1 Neon Lights
2-6-4.
Mains Distribution Board 200PL1 Fuses
2-6-5.
Mains Distribution Board 200PL1 Potentiometers
2-6-6.
Mains Distribution Board 200PL1 Straps
2-6-7.
Mains Distribution Board 200PL1 Switches
LED
Function
Color
Behavior
N1
Power Present
Orange Normal status: ON
ON when power from the Generator Transformer is
present.
OFF when power from the Generator Transformer
is not present. In this case check the status of the
N2 neon light.
N2
K1 under tension
Orange Normal status: ON
ON when the K1 contact is under tension.
OFF when the K1 contact is not under tension. In
this case, proceed as follows:
• Check the X2 relay on the Mains Distribution
Board 200PL1.
• If the X2 relay is okay, check that the tension
selector (SEL) is on the correct value.
• If the X2 relay and the tension selector are OK,
check the upstream fuses at the mains input.
Fuse
Specification
PN
Function
F1
250 Vac, 1 A, Delay
58079686
1 A/250 V (+8 V)
F2
250 Vac, 0.5 A, Delay
58079685
0.5 A/250 V (-8 V)
F3
0.5 A/250 V (+12 V)
Strap
Function
P1
Threshold E_Sup_EMax_a
P2
Threshold E_Sup_EMin_a
Strap
Function
IN1
Not Applicable
IN2
BT Power Selector. Must be on left-hand side in the BT position.
Strap
Function
SW1
Test measure E
SW2
Test measure E
