DigiDesign Digidesign Pro Tools 8.0, Reference Manual

Page: 743 / 1112

Chapter 35: Arranging Regions 725
Defining the Grid Value
In addition to affecting the placement of re-
gions, the Grid value also constrains Timeline
and Edit selections, and determines how the
Re-
gion > Quantize to Grid
command works.
To set the Grid value:
1
Do one of the following:
• From the View > Main Counter menu, select
the Time Scale for the Grid value.
– or –
• To keep the Main Time Scale and use a dif-
ferent time format for the Grid, deselect Fol-
low Main Timebase
in the Grid value pop-up
menu.
2
Do one of the following:
• From the Grid value pop-up menu, select
the time value for the Grid boundaries.
– or –
• To define a Grid based on the session’s
Markers, selections, and region boundaries,
select
Regions/Markers from the Grid value
pop-up menu.
Absolute and Relative Grid Mode
Grid mode can be applied in Absolute or Rela-
tive mode.
‹
In Absolute Grid mode, moving any region
snaps the region start to Grid boundaries . If a re-
gion’s start point falls between beats, and the
Grid is set to 1/4 notes, dragging the region will
snap its start time to the nearest 1/4 note (the
current absolute Grid value).
‹
In Relative Grid mode, regions can be moved
by Grid (or Nudge) units . If a region’s start point
falls between beats and the Grid is set to 1/4
notes, dragging the region will be constrained to
1/4 notes, preserving the region’s relative posi-
tion to the nearest beat.
To select Absolute or Relative Grid mode:
„
Click the Grid mode selector and select Abso-
lute Grid
or
Relative Grid
.
To place or move a region while in Grid mode:
1
Configure the Grid value (see “Defining the
Grid Value” on page 725).
2
Do one of the following:
• Drag a region from the Region List to an ex-
isting track.
– or –
• With the Time Grabber tool, drag a region
already in a track to a new location.
The region’s start point snaps to the closest Grid
boundary. If the region has a sync point defined,
the sync point snaps to the Grid boundary.
Grid value pop-up menu showing Bars|Beats
To temporarily suspend Grid mode and
switch to Slip mode while dragging a region,
hold down the Control key (Windows) or
Command key (Mac).