Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 80 / 874

2-2
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 2 Audit Troubleshooting
Audit Events and Alarms
AUDIT (1)
For additional information, refer to the “Test Report—Audit (1)” section on page 2-17 .
AUDIT (2)
For additional information, refer to the “Start or Stop of Signaling System 7–Circuit Identification Code
Audit—Audit (2)” section on page 2-18 .
DESCRIPTION Test Report
SEVERITY Information (INFO)
THRESHOLD 100
THROTTLE 0
PRIMARY
CAUSE
This event is used for testing the new audit category.
PRIMARY
ACTION
No action is necessary.
DESCRIPTION Start or Stop of Signaling System 7-Circuit Identification Code Audit (Start or Stop of SS7-CIC Audit)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Type of Audit–STRING [64]
PRIMARY
CAUSE
The Signaling System 7 (SS7) circuit identification code (CIC) audit has started or stopped.
PRIMARY
ACTION
No action required. This is normal operation.