Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 409 / 874

10-41
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 10 Signaling Troubleshooting
Signaling Events and Alarms
SIGNALING (76)
For additional information, refer to the “Timeout on Remote Instance—Signaling (76)” section on
page 10-109 .
SIGNALING (77)
For additional information, refer to the “Integrated Services Digital Network D-channel Switchover for
Non-Facility Associated Signaling—Signaling (77)” section on page 10-109 .
DESCRIPTION Timeout on Remote Instance
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Port Number–TWO_BYTES
Hostname–STRING [64]
PRIMARY
CAUSE
The communication between the call agent and the remote instance is faulty.
PRIMARY
ACTION
No action needed.
DESCRIPTION Integrated Services Digital Network D-channel Switchover for Non-Facility Associated Signaling
(ISDN D-channel Switchover for NFAS)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Trunk Group ID–FOUR_BYTES
Trunk Group Index–FOUR_BYTES
PRIMARY
CAUSE
The D-channels were manually switched using the command line interface (CLI).
PRIMARY
ACTION
Verify the operator action.
SECONDARY
CAUSE
The active D-channel is lost.
SECONDARY
ACTION
Verify that the gateway is operational and that the connection to the PBX is good.