Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 254 / 874

7-22
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 7 Maintenance Troubleshooting
Maintenance Events and Alarms
MAINTENANCE (36)
For additional information, refer to the “Process Manager: Sending All Processes Initialization
Complete to Process—Maintenance (36)” section on page 7-75 .
MAINTENANCE (37)
For additional information, refer to the “Process Manager: Killing Process—Maintenance (37)” section
on page 7-75 .
DESCRIPTION Process Manager: Sending All Processes Init Complete to Process (PMG: Sending All Processes Init
Complete to Process)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Process Name–STRING [40]
Process Group–ONE_BYTE
PRIMARY
CAUSE
The system is being brought up, and all processes are being notified to start executing.
PRIMARY
ACTION
No action is necessary.
DESCRIPTION Process Manager: Killing Process (PMG: Killing Process)
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Process Name–STRING [40]
Process Group–ONE_BYTE
PRIMARY
CAUSE
One of the following software problems occurred while the system was being brought up or shut down.
PRIMARY
ACTION
No action is necessary.
SECONDARY
CAUSE
A process did not come up when the system was brought up and had to be killed in order to restart it.
TERNARY
CAUSE
A process did not exit when asked to exit.