9-6
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 9 Security Troubleshooting
Monitoring Security Events
Internet Protocol Security Outgoing Security Association Not Found—Security
(5)
The Internet Protocol Security Outgoing Security Association Not Found event serves as a warning that
the KMS is unable to find a provisioned device to establish the needed SA. To correct the primary cause
of the event, remove or modify the security policy which caused the ‘SA not found’ error.
Secure Session Initiation Protocol Endpoint Validation Failure—Security (6)
The Secure Session Initiation Protocol Endpoint Validation Failure event serves as a warning that a
secure SIP endpoint validation failed. The primary cause of the event is that the BTS 10200 is incorrectly
provisioned. To correct the primary cause of the event, check if correct value of
secure-fqdn
is
provisioned in the BTS 10200 system. The secondary cause of the event is that the DNS is incorrectly
provisioned. To correct the secondary cause of the event, verify resolution of
secure-fqdn
in the DNS.
The ternary cause of the event is that the CPE is incorrectly provisioned. To correct the ternary cause of
the event, verify the CPE provisioning to ensure that the correct source IP/contact being used.
