Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 433 / 874

10-65
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 10 Signaling Troubleshooting
Signaling Events and Alarms
SIGNALING (118)
To troubleshoot and correct the cause of the alarm, refer to the “Circuit Verification Response Received
with Failed Indication—Signaling (118)” section on page 10-153 .
SIGNALING (119)
To troubleshoot and correct the cause of the alarm, refer to the “Signaling System 7 Adapter Process
Faulty—Signaling (119)” section on page 10-153 .
DESCRIPTION Circuit Verification Response Received with Failed Indication (CVR Received with Failed Indication)
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC–TWO_BYTES
TGN-ID–EIGHT_BYTES
DPC–STRING [20]
OPC–STRING [20]
PRIMARY
CAUSE
A CIC mismatch occurred.
PRIMARY
ACTION
Perform an internal test such as checking that the CIC is assigned to a circuit between the sending and
the receiving switch.
DESCRIPTION Signaling System 7 Adapter Process Faulty (S7A Process Faulty)
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS Reason–STRING [36]
PRIMARY
CAUSE
An OMNI or S7A exception has occurred.
PRIMARY
ACTION
Check the OMNI process. The S7A will restart itself if S7A maximum number of restarts is not
exceeded.