ABB Relion 611 Series, Technical Manual

Page: 94 / 536

Table 64: SCHLCCH3 output signals
Parameter Values (Range) Unit Step Default Description
CH3LIV True
False
Status of Ethernet channel X3/LAN.
Value is "True" if the port is receiving
Ethernet frames. Valid only when
Redundant mode is set to "None" or port
is not one of the redundant ports (LAN A
or LAN B).
LNK3LIV Up
Down
Link status of Ethernet port X3/LAN.
3.16.2.4 Settings
Table 65: Port mode settings
Parameter Values (Range) Unit Step Default Description
Port 1 Mode Off
On
On Mode selection for rear port(s). If port is
not used, it can be set to “Off”. Port
cannot be set to “Off” when
Redundant
mode is “HSR” or “PRP” and port is one
of the redundant ports (LAN A or LAN
B) .
Port 2 Mode Off
On
On Mode selection for rear port(s). If port is
not used, it can be set to “Off”. Port
cannot be set to “Off” when Redundant
mode is “HSR” or “PRP” and port is one
of the redundant ports (LAN A or LAN B).
Port 3 Mode Off
On
On Mode selection for rear port(s). If port is
not used, it can be set to “Off”. Port
cannot be set to “Off” when
Redundant
mode is “HSR” or “PRP” and port is one
of the redundant ports (LAN A or LAN B).
3.16.2.5 Monitored data
Monitored data is available in six locations.
• Monitoring/Communication/Ethernet/Activity/CH1LIV
• Monitoring/Communication/Ethernet/Activity/CH2LIV
• Monitoring/Communication/Ethernet/Activity/CH3LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK1LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK2LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK3LIV
Section 3
1MRS757454 D
Basic functions
88 611 series
Technical Manual