ABB Relion 611 Series, Technical Manual

Page: 47 / 536

Parameter Values (Range) Unit Step Default Description
Local viewer 0 Set password
Local operator 0 Set password
Local engineer 0 Set password
Local administrator 0 Set password
1) Authorization override is disabled, communication tools ask password to enter the protection relay
2) Authorization override is enabled, communication tools do not need password to enter the protection relay, except for WHMI which always
requires it
3) Authorization override is disabled, LHMI password must be entered
4) Authorization override is enabled, LHMI password is not asked
Table 12: Binary input settings
Parameter Values (Range) Unit Step Default Description
Threshold voltage 16...176 Vdc 2
16
1)
Binary input threshold voltage
Input osc. level 2...50 events/s 1 30 Binary input oscillation suppression
threshold
Input osc. hyst 2...50 events/s 1 10 Binary input oscillation suppression
hysteresis
1) For Chinese configurations 78
Table 13: Binary input signals in card location Xnnn
Name Type Description
Xnnn-Input m
1)2)
BOOLEAN
See the application manual for terminal
connections
1) Xnnn = Slot ID, for example, X120, X130, as applicable
2) m =For example, 1, 2, depending on the serial number of the binary input in a particular BIO or AIM card
Table 14: Binary output signals in card location Xnnn
Name Type Default Description
Xnnn-Pmm
1)2)
BOOLEAN 0=False
See the application
manual for terminal
connections
1) Xnnn = Slot ID, for example, X100, X130, as applicable
2) Pmm = For example, PO1, PO2, SO1, SO2, as applicable
Table 15: Binary input settings in card location Xnnn
Name
1) Value Unit Step Default
Input m 2) filter time 5…1000 ms 5
Input m inversion 0= False
1= True
0=False
1) Xnnn = Slot ID, for example, X120, X130, as applicable
2) m = For example, 1, 2, depending on the serial number of the binary input in a particular BIO or AIM card
1MRS757454 D
Section 3
Basic functions
611 series 41
Technical Manual