ABB Relion 611 Series, Technical Manual

Page: 175 / 536

Table 168: EFHPTOC Non group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Minimum operate time 20...60000 ms 1 20 Minimum operate time for IDMT curves
Reset delay time 0...60000 ms 1 20 Reset delay time
Measurement mode 1=RMS
2=DFT
3=Peak-to-Peak
2=DFT Selects used measurement mode
Io signal Sel 1=Measured Io
2=Calculated Io
1=Measured Io Selection for used Io signal
Table 169: EFIPTOC Group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Start value 1.00...40.00 xIn 0.01 1.00 Start value
Start value Mult 0.8...10.0 0.1 1.0 Multiplier for scaling the start value
Operate delay time 20...200000 ms 10 20 Operate delay time
Table 170: EFIPTOC Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Operation 1=on
5=off
1=on Operation Off / On
Table 171: EFIPTOC Non group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Reset delay time 0...60000 ms 1 20 Reset delay time
Io signal Sel 1=Measured Io
2=Calculated Io
1=Measured Io Selection for used Io signal
4.2.1.10 Monitored data
Table 172: EFLPTOC Monitored data
Name Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time /
operate time
EFLPTOC Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Status
1MRS757454 D
Section 4
Protection functions
611 series 169
Technical Manual