YOKOGAWA UTAdvanced Series, User Manual

Page: 814 / 866

14-157
IM 05P07A01-01EN
Functions and
Applications of D Registers (for UT75A)
14
14.6 GREEN Series Compatible D Registers

Bit Configuration of D0018: PV1.E_L2_G (Loop-2 PV input error status for
GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 PV2ADC.st (Not used)
1 PV2BO.st PVBO_L2 (I4113) Loop-2 PV input burnout error
2 RJC2ERR.st (Not used)
3
4 PV2+over.st PVPOV_L2 (I4117) Loop-2 PV input over-scale
5 PV2-over.st PVMOV_L2 (I4118) Loop-2 PV input under-scale
6 to 7
8 RSP2ADC.st (Not used)
9 RSP2BO.st RSPBO_L2 (I4114) Loop-2 RSP input burnout error
10 to 11
12 C.RSP2ADC.st (Not used)
13 C.RSP2BO.st CRSPB_L2 (I4115) Burnout error when the Loop-2 RSP input is used for control.
14 AT2ERR.st ATERR_L2 (I4127) Loop-2 auto-tuning timeout error
15

Bit Configuration of D0024: MOD_L2_G (Loop-2 operation mode status for
GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 A/M2.st A.M_L2 (I4225) 0: AUTO, 1: MAN
1 R/L2.st R.L_L2 (I4226) 0: Local, 1: Remote
2 to 13
14 AT2.st AT_L2_ON (I4239) 0: Auto-tuning is OFF, 1: Auto-tuning is ON
15

Bit Configuration of D0035: PA.ER_G (Parameter error status for GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 CALB.E.st CALB_ERR (I4002) Calibration value error
1 UCALB.E.st (Not used)
2 USER.E.st (Not used)
3
4 UTMD.st SETPA_ERR (I4005) Setup parameter error
5 RANGE.st SETPA_ERR (I4005) Setup parameter error
6 SETUP.st SETPA_ERR (I4005) Setup parameter error
7
8 PARA.E.st OPEPA_ERR (I4006) Operation parameter error
9 MODE.E.st CTLPA_ERR (I4011) Control parameter error
10 to 13
14 SYSTEM.E.st SYSTEM_ERR (I4001) System data error
15