YOKOGAWA UTAdvanced Series, User Manual

Page: 634 / 866

12-51
IM 05P07A01-01EN
Functions and
Applications of D Registers (for UT35A-L)
12 12
12.5 UT35A-L D Registers

Bit Configuration of D0035: PA.ER_G (Parameter error status for GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 CALB.E.st CALB_ERR (I4002) Calibration value error
1 to 5
6 SETUP.st SETPA_ERR (I4005) Setup parameter error
7
8 PARA.E.st OPEPA_ERR (I4006) Operation parameter error
9 to 11
12 EEP.E.st FRAM_ERR (I4009) Faulty FRAM
13
14 SYSTEM.E.st SYSTEM_ERR (I4001) System data error
15

D0231: A1_G (Alarm-1 setpoint for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0231 A1 A1_G -19999 to 30000 (Set a value within the input range.)
Write: The value written in A1_G will be written in the register of A1_L1.
A1_L1 (D2504)
Note : When the same value as the current value is written to A1_G, the action to write A1_L1
is performed again. At this time, if different values are set in A1_L1, they are overwritten by
the same value.

D0232: A2_G (Alarm-2 setpoint for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0232 A2 A2_G -19999 to 30000 (Set a value within the input range.)
Write: The value written in A2_G will be written in the register of A2_L1_1.
A2_L1 (D2505)
Note : When the same value as the current value is written to A2_G, the action to write A2_L1
is performed again. At this time, if different values are set in A2_L1, they are overwritten by
the same value.

D0256: HYS_G (Limit Control Output Hysteresis for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0256 H HYS_G 0.0 to 100.0% of PV input range span (EUS)
Write: The value written in HYS_G will be written in the register of HYS_L1.
HYS_L1 (D2911)