YOKOGAWA UTAdvanced Series, User Manual

Page: 508 / 866

10-7
IM 05P07A01-01EN
Functions and
Applications of D Registers (for UM33A)
10
10.4 UM33A D Registers

Bit Configuration of D2037: ALO_L1 (Alarm-1 to alarm-8 output status)
Bit Symbol Event
0 ALO1_L1
Output status where Alarm output 1 is assighed.
0: When the alarm is turned off (alarm type: energized), or
the alarm is turned on (alarm type: de-energized). (The
relay contact is open.)
1: When the alarm is turned on (alarm type: energized), or
the alarm is turned off (alarm type: de-energized). (The
relay contact is closed.)
1 ALO2_L1
Output status where Alarm output 2 is assighed.
For bit information, same as bit 0.
2 ALO3_L1
Output status where Alarm output 3 is assighed.
For bit information, same as bit 0.
3
4
ALO4_L1
Output status where Alarm output 4 is assighed.
For bit information, same as bit 0.
5 ALO5_L1
Output status where Alarm output 5 is assighed.
For bit information, same as bit 0.
6 ALO6_L1
Output status where Alarm output 6 is assighed.
For bit information, same as bit 0.
7
8
ALO7_L1
Output status where Alarm output 7 is assighed.
For bit information, same as bit 0.
9 ALO8_L1
Output status where Alarm output 8 is assighed.
For bit information, same as bit 0.
10 to 15

Bit Configuration of D2066: DIMG (Message display interruption status)
Bit Symbol Event
0 MG1.B Message display interruption 1 (1: displayed, 0: not displayed)
1 MG2.B Message display interruption 2 (1: displayed, 0: not displayed)
2 MG3.B Message display interruption 3 (1: displayed, 0: not displayed)
3
4
MG4.B Message display interruption 4 (1: displayed, 0: not displayed)
5 to 15

Bit Configuration of D2068: PA.ER (Parameter error status)
Bit Symbol Event
0 SYSTEM_ERR System data error
1 CALB_ERR Calibration value error
2 UPARA_ERR User (parameter) default value error
3
4
SETPA_ERR Setup parameter error
5 OPEPA_ERR Operation parameter error
6 to 7
8
FRAM_ERR Faulty FRAM
9
10
CTLPA_ERR Control parameter error
11 to 15

Bit Configuration of D2070: OP.ER (Option error status)
Bit Symbol Event
0 E1_ERR Nonresponding hardware of E1 terminal area
1 to 7
8
COM_E1_ERR Communication error E1 terminal area
9 to 15