manualshive.com logo in svg

YOKOGAWA UTAdvanced Series, User Manual

Share
Download
YOKOGAWA UTAdvanced Series User Manual Download Page 375

8-50

IM 05P07A01-01EN

8.4  UT35A/UT32A/UT32A-D/UP35A/UP32A D Registers

Control Action-related Setting  (D4601 to D4700)

Register 

No.

Description

Range and meaning of value

D4601

SC_L2

Super function

0:  OFF (Disable)

1:  Overshoot suppressing function (normal mode)

2:  Hunting suppressing function (stable mode)

  Enables to answer the wider characteristic 

changes compared with response mode.

3:  Hunting suppressing function (response mode)

  Enables quick follow-up and short converging 

time of PV for the changed SP.

4:  Overshoot suppressing function (strong 

suppressing mode)

Note: Setpoints 2 and 3 must be used in PID control 

or PI control. Disabled in the following controls:

 

1) ON/OFF control, 2) PD control, 3) P control, 

4) Heating/cooling control

 

Do not use the function for the control 

processes with response such as flow or 

pressure control.

D4602
D4603

AT.TY_L2

Auto-tuning type

0: Normal

1: Stability

D4604

AT.OH_L2

Output high limit in auto-tuning

-5.0 to 105.0%

D4605

AT.OL_L2

Output low limit in auto-tuning

D4606

AT.BS_L2

SP bias in auto-tuning

-100.0 to 100.0% of PV input range span (EUS)

D4607 to D4625
D4626

A

R_L2

Anti-reset windup (excess integration 

prevention)

0: AUTO, 50.0 to 200.0%

D4627

O

PR_L2

Output velocity limiter

0: OFF (Disable), 0.1 to 100.0%/s

D4628

O

LMT_L2

Output limiter switch

0: OFF (Disable output limiter in MAN mode)

1: ON (Enable output limiter in MAN mode)

D4629 to D4630

D4631

MPON_L2

Manual preset output number selection

Select the output used in MAN mode when 

switched from AUTO to MAN mode.

0:  OFF (Hold the control output in AUTO mode 

(bumpless))

1:  Use manual preset output 1 (output bump)

2:  Use manual preset output 2 (output bump)

3:  Use manual preset output 3 (output bump)

4:  Use manual preset output 4 (output bump)

5:  Use manual preset output 5 (output bump)

D4632

MPO1_L2

Manual preset output 1

-5.0 to 105.0% 

However, output is limited to the output high limit 

and low limit.

D4633

MPO2_L2

Manual preset output 2

D4634

MPO3_L2

Manual preset output 3

D4635

MPO4_L2

Manual preset output 4

D4636

MPO5_L2

Manual preset output 5

D4637 to D4652

Summary of Contents for UTAdvanced Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands