YOKOGAWA UTAdvanced Series, User Manual

Page: 395 / 866

8-70
IM 05P07A01-01EN
8.4 UT35A/UT32A/UT32A-D/UP35A/UP32A D Registers
Register
No.
Description Range and meaning of value
D5026 ZON_L2 Loop-2 zone PID selection
If set to “SP group number selection,” allows PID
constants to be selected for each SP group.
If set to “Zone PID selection,” automatically selects
PID constants according to the range set in the
Reference point.
0: SP group number selection 1
1: Zone PID selection (selection by PV)
2: Zone PID selection (selection by target SP)
3: SP group number selection 2
4: Zone PID selection (selection by SP)
D5027 to D5100
Input Setting (D5101 to D5300)
Register
No.
Description Range and meaning of value
D5101 IN PV input type
0: OFF (Disable)
1: K1 (-270.0 to 1370.0°
C
/ -450.0 to 2500.0 F)
2: K2 (-270.0 to 1000.0°C / -450.0 to 2300.0 F)
3: K3 (-200.0 to 500.0°C / -200.0 to 1000.0 F)
4: J (-200.0 to 1200.0°C / -300.0 to 2300.0 F)
5: T1 (-270.0 to 400.0°C / -450.0 to 750.0 F)
6: T2 (0.0 to 400.0°C / -200.0 to 750.0 F)
7: B (0.0 to 1800.0°C / 32 to 3300 F)
8: S (0.0 to 1700.0°C / 32 to 3100 F)
9: R (0.0 to 1700.0°C / 32 to 3100 F)
10: N (-200.0 to 1300.0°C / -300.0 to 2400.0 F)
11: E (-270.0 to 1000.0°C / -450.0 to 1800.0 F)
12: L (-200.0 to 900.0°C / -300.0 to 1600.0 F)
13: U1 (-200.0 to 400.0°C / -300.0 to 750.0 F)
14: U2 (0.0 to 400.0°C / -200.0 to 1000.0 F)
15: W (0.0 to 2300.0°C / 32 to 4200 F)
16: PL2 (0.0 to 1390.0°C / 32.0 to 2500.0 F)
17: P2040 (0.0 to 1900.0°C / 32 to 3400 F)
18: WRE (0.0 to 2000.0°C / 32 to 3600 F)
30: JPT1 (-200.0 to 500.0°C / -300.0 to 1000.0 F)
31: JPT2 (-150.00 to 150.00°C / -200.0 to 300.0 F)
35: PT1 (-200.0 to 850.0°C / -300.0 to 1560.0 F)
36: PT2 (-200.0 to 500.0°C / -300.0 to 1000.0 F)
37: PT3 (-150.00 to 150.00°C / -200.0 to 300.0 F)
40: 0.4-2V (0.400 to 2.000 V)
41: 1-5V (1.000 to 5.000 V)
42: 4-20 (4.00 to 20.00 mA)
50: 0-2V (0.000 to 2.000 V)
51: 0-10V (0.00 to 10.00 V)
52: 0-20 (0.00 to 20.00 mA)
55: -1020 (-10.00 to 20.00 mV)
56: 0-100 (0.0 to 100.0 mV)
*W: W-5% Re/W-26% Re(Hoskins Mfg. Co.), ASTM E988
WRE: W97Re3-W75Re25
D5102 UNIT PV input unit
0, 2, 3, 4: - (No unit)
1: C (Degree Celsius)
5: F (Degree Fahrenheit)
D5103 DP PV input decimal point position
0: No decimal place
1: One decimal place
2: Two decimal places
3: Three decimal places
4: Four decimal places
D5104 RH M aximum value of PV input range
Depends on the input type.
- For temperature input -
Set the temperature range that is actually controlled. (RL<RH)
- For voltage / current input -
Set the range of a voltage / current signal that is applied.
The scale across which the voltage / current signal is actually
controlled should be set using the maximum value of input
scale (SH) and minimum value of input scale (SL).
(Input is always 0% when RL = RH.)
D5105 RL Minimum value of PV input range
D5106
S DP
P V input scale decimal point position Same as D5103