YOKOGAWA UTAdvanced Series, User Manual

Page: 187 / 866

6-86
IM 05P07A01-01EN
6.4 UT55A/UT52A/UP55A D Registers
Register
No.
Description Range and meaning of value
D5115
A.LC
PV analog input low signal cutoff 0.0 to 5.0%
D5116 to D5120
D5121 IN_E1 RSP remote input type
4 0: 0.4-2V (0.400 to 2.000 V)
41: 1-5V (1.000 to 5.000 V)
50: 0-2V (0.000 to 2.000 V)
51: 0-10V (0.00 to 10.00 V)
57: 0-125 (0.000 to 1.250 V)
For option /DR, RSP remote input type is same as PV
input type.
D5122 UNIT_E1 RSP remote input unit Same as D5102
D5123 DP_E1 RSP remote input decimal point position Same as D5103
D5124 RH_E1
Maximum value of RSP remote input
range
Depends on the input type.
- For temperature input (with /DR option) -
Set the temperature range that is actually controlled. (RL<RH)
- For voltage / current (with /DR option) input -
Set the range of a voltage / current signal that is applied.
The scale across which the voltage / current signal is actually
controlled should be set using the maximum value of input
scale (SH) and minimum value of input scale (SL).
(Input is always 0% when RL = RH.)
D5125 RL_E1
Minimum value of RSP remote input
range
D5126 S DP_E1 RSP remote input scale decimal point position Same as D5103
D5127 SH_E1 Maximum value of RSP remote input scale
Same as D5107, D5108
D5128 SL_E1 Minimum value of RSP remote input scale
D5129 BSL_E1 RSP remote input burnout action Same as D5109
D5130 RJC_E1
RSP remote input reference junction
compensation (for /DR option)
Same as D5110
D5131
ERJC_E1
RSP remote input external RJC setpoint
(for /DR option)
-10.0 to 60.0° C
D5132
RTD.S_E1
RTD wiring system
0: 3-W (3-wire system)
1: 4-W (4-wire system)
(The LL50A Parameter Setting Software is required to use
RSP terminals input as PV.)
D5133 A.BS_E1 RSP analog input bias -100.0 to 100.0% of RSP input range span (EUS)
D5134 A.FL_E1 RSP analog input filter Same as D 5113
D5135
A.SR_E1
RSP analog input square root extraction Same as D5114
D5136 A.LC_E1 RSP analog input low signal cutoff Same as D5115
D5137 DI6.D_E1 DI16 contact type (for no /DR option)
0: The assigned function is enabled when the contact is
closed.
1: The assigned function is enabled when the contact is
opened.
D5138 to D5140
D5141
IN_E2 AIN2 aux. analog input type Same as D5121
D5142 UNIT_E2 AIN2 aux. analog input unit Same as D5102
D5143 DP_E2 AIN2 aux. analog input decimal point position Same as D5103
D5144 RH_E2
Maximum value of AIN2 aux. analog input
range
Depends on the input type.
Set the range of a voltage signal that is applied.
The scale across which the voltage signal is actually controlled should
be set using the maximum value of input scale (SH) and minimum value
of input scale (SL).
(Input is always 0% when RL = RH.)
D5145 RL_E2
Minimum value of AIN2 aux. analog input
range
D5146 SDP_E2 AIN2 aux. analog input scale decimal point position Same as D5103
D5147 SH_E2 Maximum value of AIN2 aux. analog input scale
Same as D5107, D5108
D5148 S L_E2 Minimum value of AIN2 aux. analog input scale
D5149 BSL_E2 AIN2 aux. analog input burnout action Same as D5109
D5150 to D5151
D5152
A.BS_E2
AIN2 aux. analog input bias -100.0 to 100.0% of AIN2 input range span (EUS)
D5153 A.FL_E2
AIN2 aux. analog input filter Same as D5113
D5154 A.SR_E2 AIN2 aux. analog input square root extraction Same as D5114
D5155
A.LC_E2
A IN2 aux. analog input low signal cutoff Same as D5115
D5156
D5157
DI6.D_E2
DI26 contact type Same as D5137
D5158 to D5180