YOKOGAWA UTAdvanced Series, User Manual

Page: 335 / 866

8-10
IM 05P07A01-01EN
8.4 UT35A/UT32A/UT32A-D/UP35A/UP32A D Registers
Process Data Area
Some of the D registers represent multiple events such as errors and status depending
on combinations of bits in the register.
In the following tables, if an event indicated by a specific bit occurs, the state of that bit
changes to “1.”
If no event occurs, the state of that bit is “0.” Blank lines in each table indicate unused
bits.
Process Data (D2001 to D2100)

Bit Configuration of D2001: AD1.E (A/D converter error status 1)
Bit Symbol Event
0 ADERR PV input A/D converter error
1 to 4
5
RJCERR PV input RJC error
6 to 7
8
ADBO PV input burnout error
9 to 15

Bit Configuration of D2002: PV1.E_L1 (PV input error status)
Bit Symbol Event
0 PVBO_L1 PV input burnout error
1 to 3
4
PVPOVER_L1 PV input over-scale
5 PVMOVER_L1 PV input under-scale
6 to 13
14
ATERR_L1 Auto-tuning timeout error
15

D2003 to D2007
Register
No.
Description Range and meaning of value
D2003 PV_L1 Measurment value -5.0 to 105.0% of PV input range (EU)
D2004 CSP_L1 Control setpoint
0.0 to 100.0% of PV input range (EU) (Setting
range: SPL to SPH)
D2005 OUT_L1 Control output
-5.0 to 105.0% (In Position proportional control:
valve opening)
D2006 H.OUT_L1 Heating-side control output
-5.0 to 105.0% (In Heating/cooling control: 0.0 to
105.0%)
D2007 C.OUT_L1 Cooling-side control output 0.0 to 105.0%

Bit Configuration of D2008: MOD_L1 (Operation mode status)
UT35A/UT32A
Bit Symbol Event
0 A.M 0: AUTO, 1: MAN
1 R.L_L1 0: Local, 1: Remote
2 S.R 0: Run, 1: Stop
3 to 7
8
TRK_ON_L1 1: Output tracking
9 to 13
14
AT_L1_ON 0: Auto-tuning is OFF, 1: Auto-tuning is ON
15