YOKOGAWA UTAdvanced Series, User Manual

Page: 203 / 866

6-102
IM 05P07A01-01EN
6.4 UT55A/UT52A/UP55A D Registers
DI Function Setting (D5901 to D6200)
Register
No.
Description Range and meaning of value
D5901 A/M-D *1
AUTO/MAN switch
Set an I relay number of contact input.
0: OFF (Disable)
Standard terminals
DI1: 5025, DI2: 5026, DI3: 5027
E1-terminal area
DI11: 5041, DI12: 5042, DI13: 5043,
DI14: 5044, DI15: 5045, DI16: 5046
E2 -terminal area
DI21: 5057, DI22: 5058, DI23: 5059,
DI24: 5060, DI25: 5061, DI26: 5062 *
E3-terminal area
DI31: 5073, DI32: 5074, DI33: 5075,
DI34: 5076, DI35: 5077
E4-terminal area
DI41: 5089, DI42: 5090, DI43: 5091,
DI44: 5092, DI45: 5093, DI46: 5094 *
*: [DI26: 5062] and [DI46: 5094] are only for UT55A
and UP55A.
D5902 R/L_L1-D *1
REMOTE/LOCAL switch
D5903 R/L_L2-D *1
REMOTE/LOCAL switch
D5904
S/R-D
*1
STOP/RUN switch
D5905 CAS-D *1 Switch to CAS
D5906 AUTO-D *1 Switch to AUTO
D5907 MAN-D *1
Switch to MAN
D5908 R EM_L1-D *1
Switch to REMOTE
D5909 LCL_L1-D *1
Switch to LOCAL
D5910 REM_L2-D *1
Switch to REMOTE
D5911
LCL_L2-D
*1
Switch to LOCAL
D5912 ADV-D *1 Advance of segment
D5913 HOLD-D *1
Switch to HOLD (Start of hold-mode
operation)
D5914
AT-D
*1
Auto-tuning START/STOP switch
D5915 TRK-D *1 Output tracking switch
D5916 SW-D *1
PV switch
D5917 PVHD-D *1
PV hold
D5918 CTOA-D *1
CAS to AUTO switch
D5919
D5920
LAT-D *1
Latch release
D5921
LCD-D
*1
LCD backlight ON/OFF switch
D5922 MG1-D *1 Message display interruption 1
D5923 MG2-D *1
Message display interruption 2
D5924 MG3-D *1
Message display interruption 3
D5925 MG4-D *1
Message display interruption 4
D5926 PRG-D *1
Switch to PROG (Start of program operation)
D5927 RST-D *1
Switch to RESET (Stop of program operation)
D5928
LOC-D
*1
Switch to LOCAL (LSP) (Start of local-mode operation)
D5929 REM-D *1 Switch to REMOTE (Start of local-mode operation)
D5930 P/R-D *1 PROG/RESET switch
D5931 P/L-D *1
PROG/LOCAL (LSP) switch
D5932 WAIT-D *1
Wait ON/OFF switch
D5933 A/M_L1-D *1
AUTO/MAN switch
D5934 A/M_L2-D *1
Loop-2 AUTO/MAN switch
D5935
L/C-D
*1
LOCAL (LSP)/CAS switch
D5936 P/H-D *1 PROG/HOLD switch
D5937 PVRW_L1 -D *1 Loop-1 PV red/white switch
D5938 PVRW_L2 -D *1
Loop-2 PV red/white switch
D5939 S.HLD-D *1
Switch to HOLD for synchronized program
operation
D5940 to D5940
D5941 SP.BC Bit changing method of SP number
0: Status switch 1
(Operation by key keystrokes or via
communication is enabled according to the
conditions.)
1: Status switch 2
(Operation by key keystrokes or via
communication is disabled.)
*1: Same parameter exists in other menu. “-D” is added to the end of the parameter in DI.SL menu.