YOKOGAWA UTAdvanced Series, User Manual

Page: 28 / 866

2-3
IM 05P07A01-01EN
Setting Communication Functions
2
2.1.2 Setting Ethernet Communication (for UTAdvanced with Ethernet
communication)
Setting Display
Parameter Setting Display Operation Display > PARAMETER and Left arrow keys
simultaneously for 3 seconds (to the [ CTL ] Menu Display) > Right
arrow key (to the [ ETHR ] Menu Display in E3) > SET/ENTER key (The
setting parameter is displayed.) (E3 indicating the terminal area is
displayed on Group display.)
Setting Details
Parameter
Group
display
Name Setting range Menu symbol
Factory
default
HSR
E3
High-speed response mode OFF (0)
1 to 8
ETHR
1
BPS Baud rate
9600: 9600 bps (4)
19200: 19200 bps (5)
38400: 38400 bps (6)
38400 (6)
PRI
Parity
NONE: no parity (0)
EVEN (1) EVEN: even (1)
ODD: odd (2)
IP1 IP address 1
0 to 255
192
IP2 IP address 2 168
IP3
IP address 3 1
IP4 IP address 4 1
SM1 Subnet mask 1
0 to 255
255
SM2 Subnet mask 2 255
SM3
Subnet mask 3 255
SM4 Subnet mask 4 0
DG1 Default gateway 1
0 to 255
0
DG2 Default gateway 2 0
DG3
Default gateway 3 0
DG4 Default gateway 4 0
PRT Port number 502, 1024 to 65535 502
IPAR IP access restriction
OFF: Disable (0)
OFF (0)
ON: Enable (1)
1.IP1 Permitted IP address 1-1
0 to 255 255
1.IP2 Permitted IP address 1-2
1.IP3 Permitted IP address 1-3
1.IP4
Permitted IP address 1-4
2.IP1 Permitted IP address 2-1
2.IP2 Permitted IP address 2-2
2.IP3 Permitted IP address 2-3
2.IP4
Permitted IP address 2-4
ESW Ethernet setting switch
OFF: - (0)
OFF (0)
ON: (1)
Note: Figures in parentheses "( )" are values to be set when performing communication.
► Setup of serial gateway function to the serial device: 4.5 Ethernet-Serial Gateway Function
2.1 Setting Parameters