YOKOGAWA UTAdvanced Series, User Manual

Page: 547 / 866

10-46
IM 05P07A01-01EN

D register symbols
• With regards to some D register symbols, the loop number, terminal area, and
group number are indicated by adding the underline (_) to the end of the parameter
symbols.
If both the loop number and group number are added to the parameter symbols,
they are added in the order of _loop number and _group number.
Note
Since the UM33A is a single-loop controller, it has no distinction between Loop-1 and Loop-2.
However, the register symbol has "L1" which indicates Loop-1.
oooo
_L1_Y L1 : Loop numbers
Y : Group numbers (1 to 4)
oooo
_En En : Terminal area (E1 to E4)
Example : A4_L1 Indicates A4
A1_1 Indicates A1 of PYS1 menu (group 1)
A1_2 Indicates A1 of PYS2 menu (group 2)
DO1.D_E1 Indicates DO1.D in E1-terminal area
• With regards to D register symbols from D0001 to D2000, the capital letter G with
underline (_G) is added to the end of the parameter symbols to indicate that the D
register was converted for the GREEN Series.
D registers with _G do not appear in the area for the UTAdvanced after D2001.
See “10.6.9 D Registers Converted for GREEN Series.”
oooo
_ G Example: AD1.E_G, PV1.E_L1_G, ALM_G
• Numbers in parentheses after the register symbols of the UTAdvanced indicate the
same D register after D2001.
10.6 GREEN Series Compatible D Registers