YOKOGAWA UTAdvanced Series, User Manual

Page: 274 / 866

6-173
IM 05P07A01-01EN
Functions and
Applications of D Registers (for UT55A/UT52A/UP55A)
6
6.6 GREEN Series Compatible D Registers

Bit Configuration of D0035: PA.ER_G (Parameter error status for GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 CALB.E.st CALB_ERR (I4002) Calibration value error
1 to 3
4 UTMD.st SETPA_ERR (I4005) Setup parameter error
5 RANGE.st SETPA_ERR (I4005) Setup parameter error
6 SETUP.st SETPA_ERR (I4005) Setup parameter error
7
8 PARA.E.st OPEPA_ERR (I4006) Operation parameter error
9 MODE.E.st CTLPA_ERR (I4011) Control parameter error
10 FILE.st *1 PROG_ERR (I4007) Program pattern error
11
12 EEP.E.st FRAM_ERR (I4009) Faulty FRAM
13
14 SYSTEM.E.st SYSTEM_ERR (I4001) System data error
15
*1: For UP550.

Bit Configuration of D0036: ALO_G (Alarm-1 to alarm-4 output status for GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 ALO11 ALO1_L1 (I4353)
Output status where Loop-1 alarm output 1 is assighed.
0: When the alarm is turned off (alarm type: energized), or the
alarm is turned on (alarm type: de-energized). (The relay
contact is open.)
1: When the alarm is turned on (alarm type: energized), or the
alarm is turned off (alarm type: de-energized). (The relay
contact is closed.)
1 ALO12 ALO2_L1 (I4354)
Output status where Loop-1 alarm output 2 is assighed.
For bit information, same as bit 0.
2 ALO13 ALO3_L1 (I4355)
Output status where Loop-1 alarm output 3 is assighed.
For bit information, same as bit 0.
3
4
ALO14 ALO4_L1 (I4357)
Output status where Loop-1 alarm output 4 is assighed.
For bit information, same as bit 0.
5 to 7
8
ALO21 ALO1_L2 (I4369)
Output status where Loop-2 alarm output 1 is assighed.
For bit information, same as bit 0.
9 ALO22 ALO2_L2 (I4370)
Output status where Loop-2 alarm output 2 is assighed.
For bit information, same as bit 0
10 ALO23 ALO3_L2 (I4371)
Output status where Loop-2 alarm output 3 is assighed.
For bit information, same as bit 0
11
12
ALO24 ALO4_L2 (I4373)
Output status where Loop-2 alarm output 4 is assighed.
For bit information, same as bit 0
13 to 15

D0225: PID_G (PID number for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0225 PNO PID_G Write: If ZON = 3 (SP group number selection 2), then the value written to PID_G is written to
PIDN_L1_1 through PIDN_L1_8 and PIDN_L2_1 through PIDN_L2_8, depending on the
PIDG setting (number of PID groups).
PIDN_L1_1 (D2503) PIDN_L2_1 (D3603)
PIDN_L1_2 (D2523) PIDN_L2_2 (D3623)
PIDN_L1_3 (D2543) PIDN_L2_3 (D3643)
PIDN_L1_4 (D2563) PIDN_L2_4 (D3663)
PIDN_L1_5 (D2583) PIDN_L2_5 (D3683)
PIDN_L1_6 (D2603) PIDN_L2_6 (D3703)
PIDN_L1_7 (D2623) PIDN_L2_7 (D3723)
PIDN_L1_8 (D2643) PIDN_L2_8 (D3743)
Note 1: If ZON ≠ 3, or if the PID number is selected by an external contact, then writing is disabled.
Note 2: When the same value as the current value is written to PID_G, the action to write PIDN_L1_1
through PIDN_L1_8 and PIDN_L2_1 through PIDN_L2_8 is performed again. At this time, if different
values are set in PIDN_L1_1 through PIDN_L1_8 and PIDN_L2_1 through PIDN_L2_8, they are
overwritten by the same value.
Read: Read: PID_L1 (D0009). Reads the PID number of the PID currently used.