YOKOGAWA UTAdvanced Series, User Manual

Page: 111 / 866

6-10
IM 05P07A01-01EN
6.4 UT55A/UT52A/UP55A D Registers

Bit Configuration of D2008: MOD_L1 (Loop-1 operation mode status)
UT55A/UT52A
Bit Symbol Event
0 A.M 0: AUTO, 1: MAN *1
1 R.L_L1 0: Local, 1: Remote
2 S.R 0: Run, 1: Stop
3
4
CAS_ON 1: CAS *2
5 AUTO_ON 1: AUTO *2
6 MAN_ON 1: MAN *2
7
8
TRK_ON_L1 1: Output tracking
9
10 to 13
14
AT_L1_ON 0: Auto-tuning is OFF, 1: Auto-tuning is ON
15
*1: Effective for the control modes except for cascade control and cascade secondary-loop control.
*2: Effective for cascade control mode and cascade secondary-loop control mode.
UP55A
Bit Symbol Event
0 A.M 0: AUTO, 1: MAN *1
1 to 3
4
RST_ON 1: Program reset
5 PRG_ON 1: Program operation
6 LOC_ON 1: Local operation
7
8
REM_ON 1: Remote-mode operation
9 TRK_ONOFF 1: Output tracking
10 ADV_ON 1: Advance of segment
11
12
HOLD_ON 1: Pause
13 WAITF 1: Wait
14 AT_L1_ON 0: Auto-tuning is OFF, 1: Auto-tuning is ON
15

Bit Configuration of D2009: PID_L1 (Current PID number for Loop-1 )
*1
Bit Symbol Event
0 PIDN.B0_L1 Loop-1 bit-0 of the PID number
1 PIDN.B1_L1 Loop-1 bit-1 of the PID number
2 PIDN.B2_L1 Loop-1 bit-2 of the PID number
3 PIDN.B3_L1 Loop-1 bit-3 of the PID number
4 to 15
*1: When the PID number is R (reference PID selection), the value that can be read by
communication is 0.

Bit Configuration of D2010: CSPNO. (Current control setpoint number)
Bit Symbol Event
0 CSPN.B0 Bit-0 of control setpoint number
1 CSPN.B1 Bit-1 of control setpoint number
2 CSPN.B2 Bit-2 of control setpoint number
3 CSPN.B3 Bit-3 of control setpoint number
4 to 15