YOKOGAWA UTAdvanced Series, User Manual

Page: 709 / 866

14-52
IM 05P07A01-01EN
14.4 UT75A D Registers
Loop-2 SP-related Setting (D3801 to D3900)
Register
No.
Description Range and meaning of value
D3801 RMS_L2 Remote input method
0: RSP (Via remote (aux. analog) input)
1: COM (Via communication)
RSP is not displayed if the remote (auxiliary analog)
input is not specified.
COM is not displayed if the communication function
is not specified.
When neither the remote (auxiliary analog) input
nor communication function is specified, this
parameter is not displayed.
D3802 RFL_L2 R emote input filter
0: OFF (Disable)
1 to 120 s
D3803 RT_L2 Remote input ratio
SP = Remote input x RT + Remote input bias
0.001 to 9.999
D3804 RBS_L2 Remote input bias - 100.0 to 100.0% of PV input range span (EUS)
D3805 to D3806
D3807 TMU_L2 SP ramp-rate time unit
0: HOUR (Ramp-up rate or ramp-down rate per
hour)
1: MIN (Ramp-up rate or ramp-down rate per
minute)
D3808 to D3809
D3810 SPT_L2 SP tracking selection
Tracking is performed when the mode changes
from Remote to Local. (The local setpoint keeps
track of the remote setpoint.)
0: OFF (Disable)
1: ON (Enable)
D3811 PVT_L2 P V tracking selection
C auses the setpoint to keep track of the PV so the
setpoint automatically reverts to its original value at
a preset rate of change. The UPR, DNR, and TMU
are used in combination.
Operating conditions:
1) M AN → AUTO, 2) STOP → AUTO,
3) Power-on, 4) SP number change,
5) SP change
0: OFF (Disable)
1: ON (Enable)
D3812 to D3900