YOKOGAWA UTAdvanced Series, User Manual

Page: 461 / 866

8-136
IM 05P07A01-01EN
8.6 GREEN Series Compatible D Registers

Bit Configuration of D0035: PA.ER_G (Parameter error status for GREEN Series)
Bit
Symbol
Event
GREEN Series UTAdvanced
0 CALB.E.st CALB_ERR (I4002) Calibration value error
1 to 5
6 SETUP.st SETPA_ERR (I4005) Setup parameter error
7
8 PARA.E.st OPEPA_ERR (I4006) Operation parameter error
9 MODE.E.st CTLPA_ERR (I4011) Control parameter error
10 to 11
12 EEP.E.st FRAM_ERR (I4009) Faulty FRAM
13
14 SYSTEM.E.st SYSTEM_ERR (I4001) System data error
15

D0231: A1_G (Alarm-1 setpoint for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0231 A1 A1_G -19999 to 30000 (Set a value within the input range.)
Write: The value written in A1_G will be written in the register of A1_L1_1 to A1_L1_4.
A1_L1_1 (D2504)
A1_L1_2 (D2524)
A1_L1_3 (D2544 )
A1_L1_4 (D2564)
Note : When the same value as the current value is written to A1_G, the action to write
A1_L1_1 through A1_L1_4 is performed again. At this time, if different values are set in
A1_L1_1 through A1_L1_4, they are overwritten by the same value.
Read: The alarm-1 setpoint of the group number being selected in CSPNO.(D0210).

D0232: A2_G (Alarm-2 setpoint for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0232 A2 A2_G -19999 to 30000 (Set a value within the input range.)
Write: The value written in A2_G will be written in the register of A2_L1_1 to A2_L1_4.
A2_L1_1 (D2505)
A2_L1_2 (D2525)
A2_L1_3 (D2545 )
A2_L1_4 (D2565)
Note : When the same value as the current value is written to A2_G, the action to write
A2_L1_1 through A2_L1_4 is performed again. At this time, if different values are set in
A2_L1_1 through A2_L1_4 , they are overwritten by the same value.
Read: The alarm-2 setpoint of the group number being selected in CSPNO.(D0210).

D0233: A3_G (Alarm-3 setpoint for GREEN Series)
Register
No.
Symbol
Event
GREEN Series UTAdvanced
D0233 A3 A3_G -19999 to 30000 (Set a value within the input range.)
Write: The value written in A3_G will be written in the register of A3_L1_1 to A3_L1_4.
A3_L1_1 (D2506)
A3_L1_2 (D2526)
A3_L1_3 (D2546 )
A3_L1_4 (D2566)
Note : When the same value as the current value is written to A3_G, the action to write
A3_L1_1 through A3_L1_4 is performed again. At this time, if different values are set in
A3_L1_1 through A3_L1_4 , they are overwritten by the same value.
Read: The alarm-3 setpoint of the group number being selected in CSPNO.(D0210).