YOKOGAWA UTAdvanced Series, User Manual

Page: 754 / 866

14-97
IM 05P07A01-01EN
Functions and
Applications of D Registers (for UT75A)
14
14.4 UT75A D Registers
DI Function Setting (D5901 to D6200)
Register
No.
Description Range and meaning of value
D5901 A/M-D *1
AUTO/MAN switch
Set an I relay number of contact input.
0: OFF (Disable)
Standard terminals
DI1: 5025, DI2: 5026, DI3: 5027
E2 -terminal area
DI26: 5062 *
E3-terminal area
DI31: 5073, DI32: 5074, DI33: 5075,
DI34: 5076, DI35: 5077
E4-terminal area
DI41: 5089, DI42: 5090, DI43: 5091,
DI44: 5092, DI45: 5093, DI46: 5094
D5902 R/L_L1-D *1
REMOTE/LOCAL switch
D5903 R/L_L2-D *1
REMOTE/LOCAL switch
D5904
S/R-D
*1
STOP/RUN switch
D5905 CAS-D *1 Switch to CAS
D5906 AUTO-D *1 Switch to AUTO
D5907 MAN-D *1
Switch to MAN
D5908 R EM_L1-D *1
Switch to REMOTE
D5909 LCL_L1-D *1
Switch to LOCAL
D5910 REM_L2-D *1
Switch to REMOTE
D5911
LCL_L2-D
*1
Switch to LOCAL
D5912 ADV-D *1 Advance of segment
D5913 HOLD-D *1
Switch to HOLD (Start of hold-mode
operation)
D5914
AT-D
*1
Auto-tuning START/STOP switch
D5915 TRK-D *1 Output tracking switch
D5916 SW-D *1
PV switch
D5917 PVHD-D *1
PV hold
D5918 CTOA-D *1
CAS to AUTO switch
D5919
D5920
LAT-D *1
Latch release
D5921
LCD-D
*1
LCD backlight ON/OFF switch
D5922 MG1-D *1 Message display interruption 1
D5923 MG2-D *1
Message display interruption 2
D5924 MG3-D *1
Message display interruption 3
D5925 MG4-D *1
Message display interruption 4
D5926 P.RUN-D *1
Switch to PROG (Start of program operation)
D5927 P.STP-D *1
Switch to RESET (Stop of program operation)
D5928 to D5936
D5937
PVRW_L1 -D *1 Loop-1 PV red/white switch
D5938 PVRW_L2 -D *1 Loop-2 PV red/white switch
D5939 to D5940
D5941 SP.BC Bit changing method of SP number
0: Status switch 1
(Operation by key keystrokes or via
communication is enabled according to the
conditions.)
1: Status switch 2
(Operation by key keystrokes or via
communication is disabled.)
D5942 SP.B0 Bit-0 of SP number
Set an I relay number of contact input.
0: OFF (Disable)
Standard terminals
DI1: 5025, DI2: 5026, DI3: 5027
E2 -terminal area *
DI26: 5062 *
E3-terminal area
DI31: 5073, DI32: 5074, DI33: 5075,
DI34: 5076, DI35: 5077
E4-terminal area
DI41: 5089, DI42: 5090, DI43: 5091,
DI44: 5092, DI45: 5093, DI46: 5094
D5943 SP.B1 Bit-1 of SP number
D5944 SP.B2 Bit-2 of SP number
D5945 SP.B3 Bit-3 of SP number
D5946 SP.B4 Bit-4 of SP number
*1: Same parameter exists in other menu. “-D” is added to the end of the parameter in DI.SL menu.