YOKOGAWA UTAdvanced Series, User Manual

Page: 445 / 866

8-120
IM 05P07A01-01EN
8.4 UT35A/UT32A/UT32A-D/UP35A/UP32A D Registers
Check the Number of Segments, Copy and Clear of Program Pattern (D8971 to D8993)
Register
No.
Ref.
No.
H No.
Register
symbol
R/W Description Range and meaning of value
D8971 48971 230A PTN.S R/W Pattern number designation for
comfirming number of segments
0: not select program pattern
1 to 2 (4 when the option “/AP” is specified.)
D8972 48972 230B USE.S R
Number of segments within a
pattern
The number of the segment is displayed
when the program pattern number is specified
in the parameter PTN.S.
0: Not registered
1 to 20 (40 when the option “/AP” is
specified.)
D8974 to D8980
D8981 2315 2314 CPY.S R/W Source-of-copying pattern number
designation
Set the source-of-copying pattern number
designation.
1 to 2 (4 when the option “/AP” is specified.)
D8982 2316 2315 CPY.D R/W Target-of-copying pattern number
designation
Set the target-of-copying pattern number
designation.
1 to 2 (4 when the option “/AP” is specified.)
D8983 2317 2316 PTC.TRG R/W Copy trigger 1: copy
D8984 2318 2317 PTN.ERR R Read/write error information
0: normal end
Except 0: error (See "Error information"
described later in this chapter.)
D8985 to D8990
D8991 48991 231E CLR.P
R/W Program pattern clearance
Set the number of program pattern erase.
1 to 2 (4 when the option “/AP” is specified.)
D8992 48992 231F CLR.TRG R/W Clearance trigger 1:
clear
D8993 48993 2320 PTN.ERR R Read/write error information
0: normal end
Except 0: error (See "Error information"
described later in this chapter.)
D8994 to D9000

Modbus communication
The example for the communication command is Modbus/RTU. For easy understanding,
space is added but it is not present in the actual command. The device address is “1.”

How to check the number of segments used in one pattern
Example: Checking segment numbers used in pattern 1
(1) Write pattern number “1” to D8971 (PTN.S).
(2) Read from D8972 (USE.S).
(1) 01 10 230A 0001 02 0001 [CRC]
(2) 01 03 230B 0001 [CRC]

How to copy pattern
Example: Copying patterns1 to 2
(1) Write “1” to D8981 (CPY.S: Source-of-copying pattern number designation), “2” to
D8982 (CPY.D: Target-of-copying pattern number designation), and “1” to D8983
(PTC.TRG: Copy trigger).
If “PTN.ERR” in the response is other than zero, an error occurred. If zero, the write
was successful.
(1) 01 46 2314 0003 06 0001 0002 0001 [CRC]

How to clear pattern
Example: Clearing pattern 2
(1) Write “2” to D8911 (CLR.P: Program pattern clearance) and “1” to D8992 (CLR.TRG:
Clearance trigger).
If “PTN.ERR” in the response is other than zero, an error occurred. If zero, the write
was successful.
(1) 01 46 231E 0002 04 0002 0001 [CRC]