manualshive.com logo in svg

YOKOGAWA UTAdvanced Series, User Manual

Share
Download
YOKOGAWA UTAdvanced Series User Manual Download Page 468

9-1

IM 05P07A01-01EN

Functions and 

Applications of I Relays (for UT35A/UT32A/UP35A)

9

9.1 Overview

This chapter describes the functions and applications of the I relays.

I relays are used in ladder program, Modbus communication, PC link communication, 

and contact input / output functions.

I relays contain status information of errors, operation, and alarms. Contents of I relays 

can be read only by means of communication using a host computer. (Note that the 

I relays have the same information as the D registers but with I relays, some of the 

information is read-only.).

► Contact input and output functions: Chapter 12 Contact Input and Output Functions of the 

UTAdvanced User's Manual

Use of the I relays enables the following:

 Centralized control by the host computer

D registers and I relays oh the UTAdvanced are used for parameter settings or ladder 

program creations of LL50A Parameter Setting Software.

Chapter 9  Functions and Applications of I Relays (for UT35A/UT32A/UT32A-D/UP35A/UP32A)

Summary of Contents for UTAdvanced Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands