manualshive.com logo in svg

Nortel 425-24T, Configuration Manual, Page: 147 / 488

Share
Download
Nortel 425-24T Configuration Manual Download Page 147

147

System Configuration Guide

 

Chapter 4
Getting Started with Device Manager

The Java Device Manager (JDM) software is a Graphical User Interface (GUI) 
that allows you to manage a standalone switch or a stack. JDM (also referred to as 
Device Manager) provides options found in other management tools such as 
management of VLANs and MultiLink Trunks, and displaying and printing of 
statistics in graph format.

To use Device Manager, you must have network connectivity to a management 
station running Device Manager on one of the supported platforms. You must also 
assign an IP address to the switch or stack.

This chapter contains information on the following topics:

•

“Installing Device Manager”

•

“Device Manager basics” on page 171

Installing Device Manager

The JDM software is provided on the device software

 

CD as a self-extracting 

executable file, and is also available from the Nortel web site. This chapter 
provides instructions for installing the JDM software in a Windows*, UNIX*, or 
Linux* environment.

The Java Runtime Environment (JRE) is bundled with the JDM software and does 
not require a separate installation.

For details on installing JDM, refer to the following sections:

•

“JDM installation precautions” on page 148

•

“Installing the Device Manager software” on page 149

Summary of Contents for 425-24T









































































































































































































































































































































































































































































































Reviews:

No comments