Nortel 425-24T, Configuration Manual, Page: 271 / 488

Chapter 7 System configuration using the CLI 271
System Configuration Guide
• “show terminal command”
• “terminal command” on page 271
show terminal command
The
show terminal
command displays the current serial port information,
which includes connection speed, as well as the terminal width and length in
number of characters. The syntax for the
show terminal
command is:
show terminal
The
show terminal
command is in the exec command mode.
The
show terminal
command has no parameters or variables.
Figure 99 shows the output from the
show terminal
command.
Figure 99 show terminal command output
terminal command
The
terminal
command configures the settings for the terminal. These settings
are transmit and receive speeds, terminal length, and terminal width. The syntax
of the
terminal
command is:
terminal speed {2400|4800|9600|19200|38400}|length
<1-132>|width <1-132>
The
terminal
command is in the exec mode.
425-48T(config-if)#show terminal
Terminal speed: 9600
Terminal width: 79
Terminal length: 23
425-48T(config-if)#