manualshive.com logo in svg

Nortel 425-24T, Configuration Manual, Page: 235 / 488

Share
Download
Nortel 425-24T Configuration Manual Download Page 235

Chapter 6 System configuration using the Console Interface

235

System Configuration Guide

 

Figure 86   

TELNET Configuration screen

Table 52

 describes the 

TELNET/SNMP/Web Access Configuration

 screen 

fields.

Table 52   

TELNET/SNMP/Web Access Configuration screen fields

Field

Description

TELNET Access

Allows a user remote access to the CI through a Telnet session.

Default value

Enabled

Range

Enabled, Disabled

SNMP Access

Specifies if SNMP access is allowed and only to those on the list. (SNMP access 
includes the DM system.)

Default value

Access: Enabled; Use List: Yes

Range

Access: Enabled, Disabled; Use List: Yes, No

 TELNET/SNMP/Web Access Configuration

 TELNET:                            |            Access:       Use List:

 Login Timeout     :[ 1 minute ]    |  TELNET: [ Enabled  ]     [ Yes ]

 Login Retries     :[ 3 ]           |  SNMP  : [ Enabled  ]     [ Yes ]

 Inactivity Timeout:[ 15 minutes ]  |  WEB   : [ Enabled  ]     [ Yes ]

 Event Logging     :[ All      ]    |

#         Allowed Source IP Address             Allowed Source Mask

--        -------------------------          -------------------------

 1           [ 0.0.0.0 ]                        [ 0.0.0.0 ]

 2           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 3           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 4           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 5           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 6           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 7           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 8           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 9           [ 255.255.255.255 ]                [ 255.255.255.255 ]

 10          [ 255.255.255.255 ]                [ 255.255.255.255 ]

Enter number, press <Return> or <Enter> when complete.

Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

Summary of Contents for 425-24T









































































































































































































































































































































































































































































































Reviews:

No comments