Nortel 425-24T, Configuration Manual, Page: 270 / 488

270 Chapter 7 System configuration using the CLI
320985-A Rev 01
copy running-config tftp command
This command copies contents of the current configuration file to another file on
the TFTP server. The syntax of the command is
copy running-config tftp {<address> <filename>}
This command can be executed in the config mode.
Table 72 describes the parameters and variables of this command.
Customizing your system
You can customize your system using the CLI commands described in this
section. This section covers the following topics:
• “Setting the terminal” on page 270
• “Displaying system information” on page 273
• “Setting boot parameters” on page 274
• “Setting TFTP parameters” on page 276
• “Setting the default management interface” on page 279
• “Customizing the opening banner” on page 280
• “Setting the default management interface” on page 279
Setting the terminal
You can view the terminal settings, set them to default settings, or customize the
terminal settings. This sections covers:
Table 72 copy running-config tftp command parameters and variables
Parameter Description
address Signifies the IP address of the TFTP server
filename Denotes the filename to store configuration commands
on the TFTP server