Nortel 425-24T, Configuration Manual, Page: 125 / 488

Chapter 3 CLI Basics 125
System Configuration Guide
— Example:
3/24
means unit 3, port 24
• A range of port numbers—an integer for the unit, followed by /, and integers
for the port number between 1 and 24 separated by a dash
— Example:
1/1-3
means unit 1, ports 1, 2, and 3
— Example:
3/5-24
means unit 3, port 5 through port 24
• A unit with no ports specified—an integer for the unit, followed by /, and the
word none.
—
3/none
means unit 3 with no ports
• A unit with all ports specified—an integer for the unit, followed by /, and the
word all.
—
3/all
means unit 3 with all ports
• A list of port numbers, port ranges, and/or units with all ports or no ports—
using the unit/port format—separated by commas
— Example:
1/1,2/3,3/7
means unit 1 port 1; unit 2, port 3; and unit 3,
port 7
— Example:
1/1-3,3/9-11
means unit 1, ports 1, 2, 3; and unit 3, ports 9,
10, and 11
— Example:
1/1,4/3-5,5/9-11,7/15
means unit 1, port 1; unit 4, ports
3, 4, 5; unit 5, ports 9, 10, 11; and unit 7, port 15
— Example:
1/3,3/ALL,4/NONE
means unit 1, port 3; unit 3, all ports; and
unit 4, no ports
•
none
means no ports in the stack.
•
all
means all the ports in the stack, including all GBIC ports.
To view the unit numbers in the stack, issue the
show stack-info
command
(“show stack-info command” on page 141) . You must be in the Privileged EXEC
(privExec) mode to execute this command.
Accessing CLI
You access the CI menus using Telnet or through a direct connection to the switch
from a terminal or personal computer (PC). You can use any terminal or PC with a
terminal emulator as the CLI command station. Make sure that the terminal has
the following features:
• 9600 bits per second (b/s), 8 data bits, 1 stop bit, no parity, no flow control