Nortel 425-24T, Configuration Manual, Page: 246 / 488

246 Chapter 6 System configuration using the Console Interface
320985-A Rev 01
Retrieve Configuration File
from Server This field specifies whether to retrieve the stored ASCII configuration file
from the specified TFTP server (default value is No).
If you choose Yes, the download process begins immediately and, when
the download is completed, the switch/stack will be configured based on
the CLI commands in the ASCII configuration file.
Use the spacebar to toggle the selection to Yes.
Press
Enter
to initiate the download process.
Default value No
Range Yes, No
Last Manual Configuration
Status
The system displays the status of the last manual configuration.
Default value Passed
Range Passed, Failed
Last Auto Configuration
Status The system displays the status of the last automatic configuration.
Default value Passed
Range Passed, Failed
Auto Configuration on
Reset This field allows you to select the option of automatically configuring the
switch or stack every time the switch or the stack is reset. The values that
can be assigned to this field are:
• Disabled — Auto configuration on reset is disabled.
• Use Configured — Use manually configured ASCII configuration file
name and TFTP server address for auto configuration on reset.
• Use BootP — Retrieve ASCII configuration file name, and optionally
server address, using BootP, when BootP is enabled, and perform auto
configuration on reset using these parameters.
Note : Refer to Appendix D, “Sample BootP configuration file,” on page 443
for a sample BootP configuration file.
Default value Disabled
Range Disabled, Use Configured, Use BootP
Table 56 ASCII Configuration File Download/Upload screen fields
Field Description