Nortel 425-24T, Configuration Manual, Page: 278 / 488

278 Chapter 7 System configuration using the CLI
320985-A Rev 01
no tftp-server command
The
no tftp-server
command clears the TFTP server IP address to 0.0.0.0.
The syntax of the
no tftp-server
command is:
no tftp-server
The
no tftp-server
command is in the config command mode.
The
no tftp-server
command has no parameters or values.
copy config tftp command
The
copy config tftp
command copies the current configuration file onto the
TFTP server. The syntax for the
copy config tftp
command is:
copy config tftp [address <XXX.XXX.XXX.XXX>] filename <WORD>
The
copy config tftp
command is in the privExec command mode.
Table 78 describes the parameters and variables for the
copy config tftp
command.
copy tftp config command
The
copy tftp config
command retrieves the system configuration file from
the TFTP server and uses the retrieved information as the current configuration on
the system.The syntax for the
copy tftp config
command is:
copy tftp config [address <XXX.XXX.XXX.XXX>] filename <WORD>
Table 78 copy config tftp command parameters and variables
Parameters and
variables
Description
address
<XXX.XXX.XXX.XXX> Specifies the TFTP server IP address; enter in dotted-decimal
notation.
filename <WORD> Specifies filename that you want to copy the configuration file
onto the TFTP server. Enter the name you want the
configuration file to have on the TFTP server.