Nortel 425-24T, Configuration Manual, Page: 99 / 488

Chapter 2 Using the console interface 99
System Configuration Guide
Display System Log Displays the System Log screen (see
System Monitoring Guide for Nortel
Ethernet Switches 325 and 425, Software Release 3.6
(320989-A)).
Reset Resets the switch with the current configuration settings. This option is followed
by a screen prompt that precedes the action. Enter
Yes to reset the switch; enter
No to abort the option:
• If the switch is participating in a stack configuration, you can reset the entire
stack.
• When you select this option, the switch resets, runs a self-test, then displays
the Nortel logo screen. Press
Ctrl+
Y to access the Ethernet Switch 325/425
main menu.
Reset to Default
Settings Resets the switch to the factory default configuration settings. This option is
followed by a screen prompt that precedes the action. Enter
Yes to reset the
switch to the factory default configuration settings; enter No to abort the option:
• If the switch is participating in a stack configuration, you can reset the entire
stack.
• When you select this option, the switch resets, runs a self-test, then displays
the Nortel logo screen. Press
Ctrl+
Y to access the Ethernet Switch 325/425
main menu.
Caution: If you choose the Reset to Default Settings option, all configured
settings are replaced with factory default settings when you press [Enter]
Achtung: Bei Auswahl des Befehls zur Rücksetzung auf die
Standardeinstellungen werden alle von Ihnen konfigurierten Einstellungen
durch die werkseitigen Standardeinstellungen ersetzt, wenn Sie die
Eingabetaste drücken.
Attention: Si vous restaurez la configuration usine, votre configuration
courante sera remplacée par la configuration usine dès que vous appuierez sur
[Entrée].
Precaución:
Si selecciona el comando Restaurar valores predeterminados,
todos los valores de configuración se sustituirán por las valores
predeterminados en fábrica al pulsar [Intro].
Attenzione: Nel caso in cui si selezioni la reimpostazione dei valori di
default, tutte le impostazioni configurate verranno sostituite dai default di
fabbrica premendo il tasto [Invio].
Table 14 Console interface main menu options (continued)
Option Description