NEC ELECTRA ELITE IPK II, User Manual

Page: 677 / 1190

Electra Elite IPK II Document Revision 4C
ISDN Compatibility 2 - 653
A
Should Caller ID be included
in the call's setup message?
In 15-01-04, enter 1
In 10-03-05 enter 1. In 15-01-04, enter 0
In 10-03-05 enter 0
No Yes
In 21-12-01, program the calling party
number data (15 digits max.) for each
trunk.
In 20-06-01, assign
Class of Service to
extensions.
In 21-13-01, program the calling party
number data (15 digits max.) for each
extension.
Are outgoing
calls allowed on
specific trunks?
In 14-01-07, enter 1 to
allow outgoing calls.
In 14-01-07, enter 0
to prevent outgoing
calls.
In 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI trunks).
Do you need to restrict
certain extensions from
placing calls on certain
trunks?
In 14-07-01 for
each Access Map,
select the access
options
for each trunk.
In 15-06-01,
assign extensions
to Access Maps.
Build an outgoing restriction matrix.
In the default program,
extensions have full
access to all trunks.
Yes No
Yes
Should caller hear DTMF
confirmation tones as they
are dialing a trunk call?
In 14-01-10, enter 0. In 14-01-10, enter 1.
No
YEs No
Go To
B
Should telco display the
calling number's sub-
address?
In 20-09-03, enter 1 to
enable sub-address
display by telco.
In 20-09-03, enter 0 to
disable sub-address
display by telco.
Yes No
If a user preselects a line, how
long should the system
remember the preselection?
In 20-02-06, enter
the preselection
interval.
If the system detects the called party is
busy, how long should the busy
tone be heard? (0-64800)
Yes
No