NEC ELECTRA ELITE IPK II, User Manual

Page: 739 / 1190

Electra Elite IPK II Document Revision 4C
Multiline Conference Bridge 2 - 715
Multiline Conference Bridge
Description
Multiline Conference Bridge allows any intercom or outside caller to call the CNF(8)-U( ) ETU to place a
multiparty conference call. Each CNF(8)-U( ) ETU supports one 8-party conference or two 4-party
conferences regulated by a switch setting. Two CNF(8)-U( ) ETUs may be installed. DSP-based
amplification provides a higher quality conference call.
Conditions

The CNF(8)-U( ) ETU can be used with any version of software on the Electra Elite IPK II
system.

When CNF is set for two, four-party conferences, ports 1~4 can be set to the same Master
Hunt Group, and ports 5~8 can be set to a different Master Hunt Group using Program
11-07-01 (Department Group Pilot Numbers) and Program 16-02-01 (Department Group
Assignment for Extensions). This allows two different Pilot Numbers for each conference.
- OR -

If only one Pilot number is needed, put all eight ports in one hunt group using Program
16-02-01 (Department Group Assignment for Extensions). When the password is entered,
the conference selected is the conference you enter.

The supervisor must perform the Setting Procedures before the Conference Bridge can be
used.

Up to 16 Voice Mail ports are available. The CNF(8)-U( ) ETU reduces this number by
eight.

Each CNF(8)-U( ) ETU reduces the number of stations by eight.
Default Setting
None
System Availability
Terminals
All Multiline Terminals