NEC ELECTRA ELITE IPK II, User Manual

Page: 417 / 1190

Electra Elite IPK II Document Revision 4C
D
term
Cordless II Terminal 2 - 393
To adjust ring volume:
While the telephone is not being used, press R/VOL (upper key on left side) repeatedly to select desired
setting display:

Ring Type A High

Ring Type A Low

Ring Type B High

Ring Type B Low

Ring Type C High

Ring Type C Low

Ring Off (Vibration)
To adjust receive volume level:
1. With a call in progress, press R/VOL to decrease volume.
2. Press R/VOL to restore normal volume.
To Mute the microphone:
1. Press and hold MUTE (lower key on left side).
2. Release MUTE to activate microphone.
To use the Charging Unit:
1. Place handset and/or spare battery in the charging slots.
2. The Charge 1 LED is on red during and after charging the handset.
3. The Charge 2 LED is on red while charging the spare battery and turns off after charging is
complete.

If the handset is placed in the charger without an installed battery, the Charge 1 LED flashes.
To Switch from Cordless to Desk Using Base Unit:
1. When Cordless II is associated with a terminal, use the Base Unit to switch between Cordless II
and the Multiline Terminal. Refer to Cordless II Base Unit Controls illustration on the next page.
2. Either press Cordless to select D
term
Cordless II.